Fantastic soft!
20 years anniversary in 2022!!!
New release with bugfixes and new LUA version below!
All versions will work just fine.
Please DO NOT USE any versions older than 0.3.5.2 (became a hacktool).
PtokaX 0.4.x.x
go to Settings, Advanced, Advanced security and be sure that the option to Check if user send correct ip in protocol command (DDoS protection) is enabled.
PtokaX 0.3.5.2 or 3.6.0.0
go to Settings,then Options tab and make sure that the option to 'Check user IP in commands' is enabled.
PS:
When messing around with language files please leave phrase "This hub is running" alone - dont translate it or soft verssion wont be detected in some cases - especially when cyrilic / russian is used.
PTOKAX - NMDC - linux, windows and ARM.
Moderator: Admin
13 posts
• Page 1 of 2 • 1, 2
- Attachments
-
0.5.3.0-54-64.zip- Windows x64 LUA 5.4.4
- (21.82 MiB) Downloaded 760 times
-
- 0.5.3.0-51-64.zip
- Windows x64 LUA 5.1
- (21.68 MiB) Downloaded 754 times
-
- 0.5.2.2-53-64.zip
- (17.34 MiB) Downloaded 1108 times
-
- 0.5.2.2-53.zip
- (17.01 MiB) Downloaded 1077 times
-
- 0.5.2.2-nix-src.zip
- (10.48 MiB) Downloaded 1052 times
-
Admin - Site Admin
- Posts: 249
- Joined: Mon May 25, 2015 11:56 am
- Location: OCALA FL USA
Small bug discovered, when trying to ban multiple IP's, hubsoft crashes, reported to PPK 
-
The-Master - Posts: 8
- Joined: Mon Oct 05, 2015 6:57 am
On what PtokaX version was that bug?
-
Admin - Site Admin
- Posts: 249
- Joined: Mon May 25, 2015 11:56 am
- Location: OCALA FL USA
Latest release, 0.5.2.1 Linux and windows versions, software runs oke, just don't try the bug, it's tested and confirmed. will be fixed by PPK asap
-
The-Master - Posts: 8
- Joined: Mon Oct 05, 2015 6:57 am
Thanx for that info.
- avoid that release then ppl.
...
I think best PX is 0.4.1.2 - solid!!
- avoid that release then ppl.
...
I think best PX is 0.4.1.2 - solid!!
-
Demona - Posts: 19
- Joined: Mon May 25, 2015 6:08 pm
- Location: POLAND
Why? because of 1 small bug? Its the best hubware there is.
Read the Changelog and you'll find lots of other bugs already found and fixed.
Read the Changelog and you'll find lots of other bugs already found and fixed.
-
The-Master - Posts: 8
- Joined: Mon Oct 05, 2015 6:57 am
I think she meant to avoid that particular release until it is fixed.
There is many versions of PX to pick from as she stated 0.4.1.2 is one of the most stable ones - i think so tooooo.
Most of big hubs use that release for years now.
But i am not a specialist in PX
There is many versions of PX to pick from as she stated 0.4.1.2 is one of the most stable ones - i think so tooooo.
Most of big hubs use that release for years now.
But i am not a specialist in PX
The Cure "Burn".
-
The Crow - Posts: 6
- Joined: Tue Feb 16, 2016 7:12 pm
Well no..
I ment because of a small bug, it's no reason to not use this stable software, just don't cause the hub to chrash by testing the bug..
Another small bug found by me btw..
by selecting script in gui, and moving over disabled scripts, those scripts state the memory use of the moved, running script..
Bug reported to PPK and action will be taken
I ment because of a small bug, it's no reason to not use this stable software, just don't cause the hub to chrash by testing the bug..
Another small bug found by me btw..
by selecting script in gui, and moving over disabled scripts, those scripts state the memory use of the moved, running script..
Bug reported to PPK and action will be taken
-
The-Master - Posts: 8
- Joined: Mon Oct 05, 2015 6:57 am
In fact.. using 0.4.1.2 is not save.. read this post-->http://dchublist.org/board/viewtopic.php?f=10&t=54#p68
-
The-Master - Posts: 8
- Joined: Mon Oct 05, 2015 6:57 am
You are right Master.
Exploit has been fixed in PtokaX version 0.5.0.3 as of 2015-02-20 so anything earlier than that is bad.
Exploit has been fixed in PtokaX version 0.5.0.3 as of 2015-02-20 so anything earlier than that is bad.
-
Admin - Site Admin
- Posts: 249
- Joined: Mon May 25, 2015 11:56 am
- Location: OCALA FL USA
13 posts
• Page 1 of 2 • 1, 2